FIXSAL STRONG BOND
Available 10g 20g 50g
Will bond most materials such as: china, ceramics porcelain, marble, glass, concrete,
glass, crystal, plastics, acrylic, Perspex, polycarbonate, PVC, ABS, rubber, vinyl,
leather, wood, MDF, and metals etc.
NOTE: Will not bond polythene or polypropylene.
INSTRUCTIONS FOR USE
Make sure that parts to be bonded are clean.
Apply glue to one part only.
Push both parts together firmly and hold for just a few seconds or a few minutes for porous materials.
NOTE: Some materials require more or less glue.
When you have finished using your glue:
Tap the base of the container on a hard surface to ensure that any surplus glue inside
the nozzle goes back into the bottle:
Wipe the nozzle with a damp cloth and replace the cap.
Store the container out of direct sunlight, upright, in a refrigerator for a longer shelf life.
TECHNICAL / ECOLOGICAL
Clear liquid with a slight odour.
Melting point – 10oC.
Boiling Point >100oC.
Keep out of reach of children.
Will bond skin and eyes in seconds.
In the event of contact with eyes, rinse with a lot of water and seek medical advice.
Use in a well ventilated area.
Irritant to eyes and skin.